NCAT Three Wheel Polisher
![P1155268transp](https://dev.troxlerlabs.com/wp-content/uploads/2022/10/P1155268transp-400x409.png)
The NCAT Three Wheel Polisher by Troxler is a device that will polish a sample to be used in friction testing. Quickly and reliably reach your sample’s terminal friction value by polishing it with the TWP. Complete with weights, a pump, and a water basin this polisher will help you verify your aggregates or mix design to help improve road safety.
Reach out to your local Troxler sales representative today for more information
Options
- VFD Motor Controller for variable speeds (capable of running at 60rpm)
- 1hp motor and gearbox combo to turn carriage (counter-clockwise)
- Runs off of 120VAC with standard 3-prong plug
- 10A maximum current draw
- Adjustable flow fountain pump, enough flow to flush particulates off sample
- Comes with 150lbs of weights (including carriage)
- Sawtooth pattern tread 2.80/2.40-4 tires on casters
- Programmable automatic counter than stops carriage rotation
- 3 wheels polish at a 11.2” diameter (matches DFT)
- Accepts up to a 20x20x2” asphalt slab, and has adjustment screws for smaller samples
- E-Stop and door sensor to stop unit
- 35×40” water basin to for water supply and drain
- Plexiglass case to prevent splashing and for visibility
- Steel pallet for holding samples that easily slides in and out of TWPD
- Lift system for raising and lowering carriage
- Adjustable feet for leveling